KISS FC – 32bit Flight Controller V1.03
– changed bootloader solderpads to a press button
– changed USB Port type
As we felt the need for a modern more simplified 32bit Flightcontroller, we made the KISS FC, which includes a complete own Flight Controll Firmware development who get rid of some old ballast, this took some time, but the result is very pleasing.
The Idea was to simplify some things and due to intensive long term testings of some pretty good Pilots we where able to optimize the code to a point where you hopefully get your quad in the air quite quick.
Normally you just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well knowen Pilots for given configurations and of course can tweak the PID yourself over the GUI.
The software setup side is reduced as far we can, many things are allready taken in to account for you, if you bring some solid soldering skills you should be able to build your quad pretty quick.
A new feature is also the inbuild telemetry, in combination with our 32bit ESC line its possible to show the live telemetry data via OSD on your FPV live feed or in the KISS FC GUI
This way you get usefull informations like the Voltage of your battery, current consumption, ESC temperature and motor RPM.
Other FC firmwares (eg. Cleanflight) can be ported for the use with the KISS FC.
Supported copter types:
– Quad +/x
– Hexa +/x
Supported RX types:
– PPM Sum
– Spektrum Sat. (serial / DSM2 & DSMX)
– Futaba / Taranis SBUS
– Jeti ExBus
– Graupner SumD / SumO
– classic RX with single channel output
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Driver for STM32F303CCT6
Normally you dont need to download any driver for the USB support.
Windows 7 8 and 10 care for this on their own after you connected the device.
The connection diagramm / Pinout you find in KISS-FC GUI.
Note: Please extract the KISS_OSD.ZIP and copy the “MAX7456” folder into the “libraries” folder of your Arduino IDE.